Memory has been expanded to 12 Modcels, and with the 16K CAMPac module (Sold Separately) it can be expanded to 18 Models.
A three function timer, all on one screen
Can be utilized as an up timer or down timer to keep track of total flying time (hours/minutes) for a particular model - and can be programmed to any of the switches, the power switch or the throttle stick.
Enhancements to the 9C Super
Glider Mode
In addition to the Basic offset trim, the 9C Super offers three other offsets (launch, thermal and speed), with camber that can be customized for each
The four camber mixes can be set up on one screen and programmed to any of the variable dials.
Besides setup ease, the glider mode boasts much more built-inflexibility
A new G2F-C mix has been added to the G1FLP and G2FLP mixes.
Airplane Mode
The gyro system can be set up for 2-rate (up/down) or 3-rate (up/centre/down) with the GYA gyros, It can also be programmed to any switch for normal or AVCS modes.
The Air Brake is now switch-selectable
Both the Airplance and Glider Modes feature 7 programmable mixes: 5 Linear mixes and two 5-point curves.
Heli Mode
5-point Throttle Curve and Pitch Curve now feature a delay that makes for a smoother transition from hover to idle-up and better control.
The throttle hold and idle-up can be assigned to any switch that feels more comfortable for the pilot.
Hi/Low Pitch can be utilized to adjust the curves on the high side and low side for each flight condition.
Choose from six heli mixes: SWH1, SWH2, SR3, SN3, SWH4 and the new SWH3, along with two linear circuits and one 5-point curve.
All 9C Computer Systems Feature:
Rotary Dial/4-button Programming
2 Proportional Slide Switch Controls
Assignable switches
All-electronic Trims w/Auto Memory
128 x 64 Dot Graphics LCD
Servo Cycle & Bar Graph Display
Expanded Chart/Curve Graphics
Constant trim, voltage, name and timer display
8-character Model Naming
Model Copy (Data Transfer available w/optional CAMpac use)
Basic & Advanced Programming Menus
Full Functionality Trainer System
Sanyo Transmitter & Receiver NiCds
Compatibility with all Futaba FM and 1024 PCM Receivers
End Point Adjustment (EPA) on all channels
Dual or Triple Rates (ele/ail/rud)
Exponential (ele/ail/rud/thr)
Throttle Cut & Idle-down
Electronic Subtrim (all channels)
Fail Safe (all channels; PCM models only)
ATL Trim (on/off)
Length-/Tension-adjustable Sticks
Servo Reversing (all channels)
Power and transmission LEDs
9C Programmable Features:Virtually all functions assignalble
Airplanes
7 User-programmable Mixes, plus...
Aileron Differential
Airbrake (w/delayed Elevator)†
Flaperon and Flap-Trim
Elevator Flap Mix
V-Tail & ELEVON
4 Programmable Snap Rolls
Throttle-Needle Mixing
Twin Elevators Option
2nd Channel Aileron Select †
Sailplane
7 User-programmable Mixes, plus...
Single/Dual Flap Servos
Flap-Aileron
Aileron-Flap
Elevator-Flap
Aileron Differential
Butterfly Mixing
Start (Launch) Preset
Speed Preset
Running your thumb around the rim of the dial moves the cursor to highlight a menu, function o setting. Push the dial - and you select it.
Slider switches on both sides of the case can be used without taking your thumbs off the sticks or your eyes off the action sound cues confirm servo center. These fully proportional, sliders areassignabl to any switch/auxlary cennel function.
A right-angle bend in the 9C's new-style trainer plug allows the rim around the RF module to protect it from port/plug damage.
The extra-large LCD screen makes all graphics easier to read, from servo travel to the 5-point curves for governor mixing and throttle.
9CHP -No Servos
